-- This module defines enterprise MIBs for security zones
--
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.NETSCREEN-ZONE-MIB DEFINITIONS::=BEGINIMPORTSnetscreenZone
FROM NETSCREEN-SMI
Integer32,MODULE-IDENTITY,OBJECT-TYPEFROM SNMPv2-SMI
DisplayStringFROM SNMPv2-TC
;netscreenZoneMibModule MODULE-IDENTITYLAST-UPDATED"200405032022Z"-- May 03, 2004ORGANIZATION"Juniper Networks, Inc."CONTACT-INFO"Customer Support
1194 North Mathilda Avenue
Sunnyvale, California 94089-1206
USA
Tel: 1-800-638-8296
E-mail: customerservice@juniper.net
HTTP://www.juniper.net"DESCRIPTION"This module defines the object that are used to monitor all
the security zones"REVISION"200405030000Z"-- May 03, 2004DESCRIPTION"Modified copyright and contact information"REVISION"200403030000Z"-- March 03, 2004
DESCRIPTION"Converted to SMIv2 by Longview Software"REVISION"200311130000Z"-- November 13, 2003DESCRIPTION"Correct spelling mistake"REVISION"200109280000Z"-- September 28, 2001DESCRIPTION"no comment"REVISION"200005080000Z"-- May 08, 2000DESCRIPTION"Creation Date"::={ netscreenZone 0}
NsZoneCfgEntry ::=SEQUENCE{
nsZoneCfgId Integer32,
nsZoneCfgName DisplayString,
nsZoneCfgType INTEGER,
nsZoneCfgVsys Integer32}nsZoneCfg OBJECTIDENTIFIER::={ netscreenZone 1}nsZoneCfgTable OBJECT-TYPESYNTAXSEQUENCEOF NsZoneCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"NetScreen device can have lots of secure zone. This table
collects the zones exiting in NetScreen device."::={ nsZoneCfg 1}
nsZoneCfgEntry OBJECT-TYPESYNTAX NsZoneCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in the table holds a set of configuration
parameters associated with an instance of secure zone."INDEX{ nsZoneCfgId }::={ nsZoneCfgTable 1}nsZoneCfgId OBJECT-TYPESYNTAXInteger32(0..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A unique value for zone table. Its value ranges between 1 and
65535 and may not be contiguous. the index has no other
meaning but a pure index"::={ nsZoneCfgEntry 1}nsZoneCfgName OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Secure zone name."::={ nsZoneCfgEntry 2}
nsZoneCfgType OBJECT-TYPESYNTAXINTEGER{regular(0),layer2(1),tunnel(2),null(3),func(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Secure zone type. Regular is sec(L3) and layer2 is sec(L2) type"::={ nsZoneCfgEntry 3}nsZoneCfgVsys OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"VSYS this security zone belongs to."::={ nsZoneCfgEntry 4}END